Filter
Top Products
Operating Basics
TSG 601 User Manual
13
3. Use the A and " keys to select the desired group of audio
channels (1–4, 5–8, 9–12, or 13–16). Press
ENTER to confirm the
selection.
4. Press any rectangular key to exit the Audio menu, or use the
Y /
B keys to go to the next selection within the Audio menu.
Specifying Inserted Audio Channels in the Group
When embedded audio is enabled, there must be at least two chan-
nels selected. This menu item allows you to select channels 1 and 2,
channels 3 and 4, or channels 1, 2, 3, and 4.
1. If necessary, enter the Audio menu (press
Shift, then Audio On/Off).
2. Use the down key to scroll to the “Audio Channel Selection”
item, and press the
ENTER key. The display will look something
like this:
3. Use the A and " keys to select the audio channel set. Press the
ENTER key to confirm the selection.
4. Press any rectangular key to exit the Audio menu, or use the
Y /
B keys to go to the next selection within the Audio menu.
Specifying Audio Channel Frequencies
The TSG601 allows the selection of one of 26 different frequencies
plus mute for each individual channel within the group. The fre-
quency of each channel within the group will be the same in all the
groups. To change the frequency assignments, do the following:
1. If necessary, enter the Audio menu (press
Shift, then Audio On/Off).