Filter
Top Products
Operating Basics
14
TSG 601 User Manual
2. Scroll down to the “Audio Frequency Selection” item and press
the
ENTER key. The display will resemble this:
3. Use the A and " keys to select the desired audio channel, and use
the
Y and B keys to select the frequency for that channel. Press
the
ENTER key to confirm these choices. If a change was made,
the display will momentarily show the channel numbers that have
new frequency assignments.
4. Press any rectangular key to exit the Audio menu, or use the
Y /
B keys to go to the next selection within the Audio menu.
Changing Audio Channel Amplitudes
Each audio channels output amplitude may be set from 0 dBFS to
–20 dBFS, in 1.0 dB increments. The following steps show how to
do this.
1. If necessary, enter the Audio menu (press
Shift, then Audio On/Off ).
2. Scroll down to the “Audio Amplitude Selection” item and press
the
ENTER key. The display will look something like this:
3. Use the A and " keys to select the desired audio channel, and use
the
Y and B keys to select the amplitude for that channel. Press
the
ENTER key to confirm these choices.
4. Press any rectangular key to exit the Audio menu, or use the
Y /
B keys to go to the next selection within the Audio menu.