Filter
Top Products
STE 58761
－ －
1-4
1.2.1 External Automatic Mode
External Operation
Signal Mode (SIG)
This mode is used to perform the program automatic
operation. This operation is carried out with
external operation signals. For details, see the
Interface Manual.
External
Automatic
Mode (EXT)
Host Mode (HOST) This mode is used to perform the program
automatic-operation, file uploading and file
downloading. All operations are carried out by the
host computer through serial communication
channel(s). For details, see the Communications
Manual.
The mode with which external automatic operation is carried out is defined in
the system configuration file. See the Start-up Manual for details.
All file selections, execution mode selections, speed override settings and
speed limit settings made in either the Internal Automatic Mode or the Test
Operation Mode are also valid in the External Automatic Mode.
1.2.2 Internal Automatic Mode
Program Selection
(SELECT)
Selects a program for execution.
Operation Mode
Selection (MODE)
Selects an operation mode.
Speed Override
(MSPEED)
Selects the speed override.
Speed Limit
(LSPEED)
Selects the speed limit.
Start-up Starts program execution from the control panel.
Stop (STOP,BREAK) Suspends or cancels program execution.
Direct Execution
(DO)
Directly executes a SCOL command.
Internal
Automatic
Mode (INT)
Reset (RESET) Resets the program execution step, variables and
digital output signals.