Toshiba ste 58761 Welding System User Manual


 
STE 58761
1-9
(2) Inserting a disk
(a) With the label up and the metal shutter forward, insert
the disk straight and slowly into the slot until you
hear it click into place.
(3) Removing a disk
(a) Push the push button. The floppy disk should pop
out a little ways from the slot.
(b) Grip the disk with your fingers at the label section
and draw it straight out.
(4) Disk write protection
All 3.5" disks have a write protect tab to prevent files
from being accidentally erased.
(a) Write protect
Slide the write protect tab toward the edge of the
disk (protect position).
(b) Write enable
Slide the write protect tab away from the edge of the
disk (write position).
!
Caution
Do not try to remove the disk while the disk
drive light is still lit. Data is either being
written to or read from the disk while the light is
lit, and if you remove the disk at this time you
may lose or damage your files.