Filter
Top Products
STE 58761
－ －
4-1
CHAPTER 4
AUXILIARY SIGNALS
(1) Function
Manages auxiliary signals used to control the hand, the air control axes, etc.
(2) Input format
None
(3) Comments
The output signal port and solenoid type corresponding to each function key must
be defined (specified) in the system configuration file. For more information, see
the Start-up Manual.
Press the "Esc" key to exit the Auxiliary Signal Operation Mode and return back to the
original menu.
While under emergency stop or in feed hold, auxiliary signals may be turned on and off.
The initial state including signals which is set for double solenoids in the power ON state is
turned off.