Filter
Top Products
120 © 2008 VBrick Systems, Inc.
Maintenance: Default All Configuration
This menu allows the user to default all the configuration parameters of the VBrick.
Maintenance: Read/Write Configuration
Maintenance: Read/Write > Read From Device
The Read/Write Configuration page allows you to read configuration parameters from the
VBrick to a file, as well as write configuration parameters from a file to the VBrick. The file is
an .xml file and Internet Explorer is the assumed browser. Note that the VBrick appliance
the .xml file is read from, and VBrick appliance the .xml file is written to, must be running the
same version of code.
Total System Up
Time
Displays the total time that the unit has been powered up.
Reset Table Displays a history of the last 10 times the VBrick restarted. The table
includes the start time, stop time and run time for each restart and also
includes an indication of whether the restart was caused by a power
loss or by an reset request from an administrator or operator.
Default All Sets all parameters except IP address, Subnet Mask, Gateway IP, User
Names, Passwords and System Date Time.
Factory Defaults Sets all parameters to factory defaults with the exception of System
Date and Time.