Filter
Top Products
46 © 2008 VBrick Systems, Inc.
network packets. The HTTP, RTSPU, and External Server SAPs controlled here all share the
Announce Common Information that is shown read-only on this page but can be changed on
the Configuration: Encoder > Announce (SAP) page.
Figure 10. Configuration: Encoder > Server – Part 2
HTTP SAP
Transmit
Enables/disables the transmission of SAPs to advertise the HTTP
URL for this encoder.
RTSPU SAP
Transmit
Enables/disables the transmission of SAP packets to advertise the
RTSP URL for this encoder.
Retransmit Time If Transmit is enabled, this setting tells the VBrick how often (in
seconds) to send a SAP.
Time To Live The number of hops (between routers) for which an IP packet is valid
on the network.
Type Of Service The TOS (Type of Service) can be configured in the IP header to
establish SAP packet priority in the network.
IP Address The IP address to which SAP information is sent out onto the
network. To have a WM encoder announce the stream to a Portal
Server, use the Portal Server IP address and default Port (9878).
Port The port SAP to which information is sent out onto the network. To
have a WM encoder announce the stream to a Portal Server, use the
Portal Server IP address and default Port (9878).
RTSP URL The RTSP URL that is advertised in RTSP SAPs.