Filter
Top Products
WM Configuration
VBrick WM Appliance Admin Guide 43
Click here to play
RTSPU
Click to trigger Windows Media Player to initiate streaming via
RTSPU. Right-click and select
Save Target As to save the .asx and
send to others for viewing.
HTTP URL Use this URL in a player, browser, or web page to view the stream
via HTTP.
RTSPU URL Use this URL in a player or web page to view the stream via RTSPU.
Select Video Rate Select a Video Rate for the selected group or None. Only those
Video Rates that are enabled on the Video page are selectable here.
Default = Video Rate1 for Group1; None for Group2 and Group3.
Select Audio Rate Select an Audio Rate for the selected group or none. Only those
Audio Rates that are enabled on the Audio page are selectable here.
Default = Audio Rate1 for Group1; None for Group2 and Group3.
Closed Caption and
Metadata
Specifies whether script data is included in group. Script data
consists of Closed Caption and Meta Data depending on what is
enabled on the Video page. Default = disabled for all groups.
HTTP Estimated Bit
Rate for group 1
Read-only. Click
Refresh to recalculate estimated bit rate when you
change settings. It may take a few moments before new values are
displayed.
RTSP UDP Estimated
Bit Rate for group 1
Read-only. Click
Refresh to recalculate estimated bit rate when you
change settings. It may take a few moments before new values are
displayed.
HTTP URL for
group 1
Read-only. Use this URL to force the Windows Media Player or
Windows Media Server to pull only the specified group.
http://172.22.173.10:8080/vbrickvideo1/group1
RTSPU URL for
group 1
Read-only. Use this URL to force the Windows Media Player or
Windows Media Server to pull only the specified group.
rtspu://172.22.173.10/vbrickvideo1/group1
MBR Group2 Check to enable group 2. Default = disabled.
MBR Group3 Check to enable group 3. Default = disabled.
Client Timeout The number of seconds the VBrick will wait before it decides that a
player that was playing its video or audio is no longer viewing or
listening.
Max. Allowed Clients Maximum number of players that can view video or audio from the
same VBrick at the same time using the RTSP or HTTP method.
Default = 50. This may be increased (maximum 200 clients) but
overall system performance may degrade as this number is increased.
It is recommended that if the Max Allowed Clients is increased, the
configuration should be tested to assure proper operation. To
disable HTTP and RTSP serving, set to zero.