Filter
Top Products
Prestige 128MH PSTN Router/Hub
Remote Node IPX Configuration 6-11
Table 6-3 contains the instructions on how to configure the Edit IP Static Route Menu.
Table 6-3. Edit IPX Static Route Menu Fields
Field Description
Server Name In this field, enter the name of the server. This must be the exact name configured in
the NetWare server.
Network #
This field contains the internal network number of the remote server that you wish to
access. [00000000] or [FFFFFFFF] are reserved.
Node # This field contains the address of the node on which the server resides. If you are using
a Novell IPX implementation, this value is [000000000001].
Socket # This field contains the socket number on which the server will receive service requests.
The default for this field is hex [0451].
Type # This field identifies the type of service the server provides. The default for this field is
hex [0004].
Gateway Node In this field, enter the number of the remote node that is the gateway for this static route.
Hop Count and
Tick Count
These two fields have the same meaning as those in the Ethernet setup.
Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm…] to
save your configuration, or press [Esc] to cancel to cancel.