Filter
Top Products
Prestige 128MH PSTN Router/Hub
2-20 Hardward Installation & Initial Setup
2.8.2 Advanced WAN Port Setup
The Advanced WAN Port Setup Menu allows you to enter the AT Commands for the WAN
devices and the call control parameters.
Step 1. In Menu 2.1, move the cursor to the Advanced Setup field and press the space bar to
select [Yes], then press [Enter].
Step 2. When Menu 2.1.1 appears, fill in the appropriate AT commands and call control
parameters for the internal modems and the external modem or ISDN TA, as shown in
Figure 2-11.
Figure 2-11. Menu 2.1.1 - Advanced WAN Port Setup
Menu 2.1.1
-
Advanced WAN Port
Setup
AT Command Strings:
Dial= atd
Drop= ~+++~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response String:
CLID= NMBR
Called Id= TO
Speed= CONNECT
Call Control
Dial Timeout(sec)= 60
Retry Counter= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
Enter here to CONFIRM or ESC to CANCEL: