Filter
Top Products
Prestige 128MH PSTN Router/Hub
Telent Configuration 12-1
Chapter 12
Telnet Configuration and Capabilities
12.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the
console port. Once your Prestige is configured, you can use telnet to configure it remotely as
shown in Figure 12-1.
Figure 12-1. Telnet Configuration on a TCP/IP Network
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still available
provided you assign the Prestige a correct IP address and subnet mask. When IP routing is
disabled, the Prestige can still function as a host.
Modem / ISDN TA
Ethernet LAN
Prestige with
Network IP Address
Telnet from any station
on the Network
Telnet from any
Remote Location
TCP/IP Network
Modem
ISDN TA
Modem/ISDN TA
Modem / ISDN TA
56
Kbps
56
Kbps
PSTN/ISDN Network
PSTN Network
(Telephone Line)
Prestige 128MH