Filter
Top Products
Prestige 128MH PSTN Router/Hub
Hardware Installation & Initial Setup 2-7
2.4 Power On Your Prestige
At this point, you should have connected the console port, the modem ports, the WAN port, the
Ethernet port and the power port to the appropriate devices or lines. You can now power on your
Prestige by plugging the AC adapter to a power outlet of the correct voltage.
Step 1. Initial Screen
When you power on your Prestige, it performs several internal tests as well as line initialization.
After the initialization, the Prestige asks you to press [Enter] to continue, as shown in Figure 2-2.
Figure 2-2. Power-On Display
Copyri
ght (c) 1994
-
1997 ZyXEL Communications Corp.
ethernet address: 00:a0:c5:01:23:45
Wan port init ... done
Modem 0 init . inactive
Modem 1 init . inactive
Modem 2 init . inactive
Press ENTER to continue...