Filter
Top Products
Prestige 128MH PSTN Router/Hub
2-18 Hardward Installation & Initial Setup
l Figure 2-10 displays Menu 2.1 when configuring modem 1 and modem 2.
Figure 2-10. Menu 2.1 - Async WAN Port Setup for Modem 1/2
Table 2-5 describes how to configure the WAN ports.
Table 2-5. Async WAN Port Setup Menu Fields
Field Description Example
Modem Name Enter a descriptive name for the Modem or ISDN TA connected to this
WAN Port.
ZyXEL
Active Set to [Yes] to activate a WAN port, then your Prestige will initialize the
WAN Port and the attached Modem or ISDN TA.
Press space-
bar
to toggle
[Yes/No]
Connection
Type
For the WAN Port, select the type of your telephone line; [Switch] for a
dial-up line and [Leased] for leased line. The connection types for the
internal modems are switched by default.
Press space-
bar
to toggle
[Switch/Leased]
Menu 2.1
-
Async WAN Port Setup
Modem Name= ZyXEL
Active= Yes
Connection Type= Switch (r.o.)
Phone Number=
Device Type= 56K Modem (r.o.)
Port Speed= 115200
AT Command String:
Init=ats0=0W2&fs95=1
Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel: