Filter
Top Products
Prestige 128MH PSTN Router/Hub
Bridging Setup 7-3
7.2.1 Remote Node Bridging Setup
Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu
11.1 - Remote Node Profile. For bridging-specific parameters, you need to configure Menu 11.3 -
Remote Node Network Layer Options.
To setup Menu 11.3 - Remote Node Network Layer Options shown in Figure 7-2, follow these
steps:
Step 1. In Menu 11.1, make sure the [Bridge] field is set to [Yes].
Step 2. Move the cursor to the [Edit IP/IPX/Bridge] field, then press the space bar to select
[Yes] and press [Enter] to open Menu 11.3 - Network Layer Options.
Figure 7-2. Menu 11.3 - Remote Node Bridging Options
Menu 11.3
-
Remote Node Network Layer Options
IP Options:
Rem IP Addr:
Rem Subnet Mask= N/A
My WAN Addr= N/A
Single User Account= N/A
Server IP Addr= N/A
Metric= N/A
Private= N/A
RIP Direction= N/A
Version= N/A
IPX Options:
Dial-On-Query= No
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= 3
SAP/RIP Timeout(min)= 3
Bridge Options:
Dial-On-Broadcast= No
Ethernet Addr Timeout(min)= 0
Enter here to CONFIRM or ESC to CANCEL: