Filter
Top Products
Prestige 128MH PSTN Router/Hub
Bridging Setup 7-5
7.2.2 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige about the route to a
node before a connection is established. You configure bridge static routes in Menu 12.3, as
shown in Figure 7-3.
Figure 7-3. Menu 12.3 - Edit Bridge Static Route
Menu 12.3
-
Edit Bridge Static Route
Route #: 21
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to CONFIRM or ESC to CANCEL: