136 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
To add or edit the emergency defaults:
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears. See
Figure 45
.
2 In the Gateway IP Address field, enter the IP address of a system-wide
emergency gateway.
3 In the Emergency Callback Phone field, enter the phone number of the
contact person responsible for emergency situations within the
organization (for example, a security guard).
4 Click Save.
The Emergency Default is applied to the entire organization.
Deleting ERLs To delete an ERL:
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 Enter a check mark in the check box preceding the ERL you want to
delete.
3 Click Delete Selected.
A pop-up window appears prompting you to confirm the ERL delete
action.
4 Click OK.
The Emergency Defaults and Emergency Services page refreshes.
Editing the IP Address
Range of an ERL
To edit an IP address range for the ERL.
CAUTION: If Emergency service settings or emergency lines are changed,
(for example, the gateway IP address or emergency digits) they will not
take effect until the telephones are power cycled. A simple logout/login
of the telephone is not adequate.
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 In the Location Settings column, click IP Ranges for the ERL you want to
edit.
The IP Ranges page appears.
