152 CHAPTER 5: CONFIGURING TELEPHONE COMMUNICATION SETTINGS
before you save a change to a setting, you exit the menu item without
saving the change.
7 Scroll Buttons — Moves up or down through the LUI menu and select
hex digits when editing a MAC address.
LUI Configuration Options for Business and Basic Telephones
Table 20
describes each LUI utility menu item that appears in the LUI for
the Business and Basic Telephones.
Table 20 Business and Basic Telephone LUI Menu Items
Menu Option Description
1 View Settings Press 1 on the number pad and scroll to view these options:
MAC Address – MAC address of this telephone.
NCP MAC Address – MAC address of the primary call
processor.
SW Build Ident. – Software version running on this telephone.
Serial # Rev – Telephone serial number and hardware version.
Phone Port Speed – Speed and duplex setting of the LAN
connection.
PC Port Speed – The speed and duplex setting of the PC port to
the device, if any, connected to the port.
My IP Address – Active IP address of this telephone.
Subnet Mask – Active IP mask.
Gatwy IP Address –
Active default gateway IP address
.
NCP IP Address – Active IP address of the call processor with
which this telephone communicates.
ALT SrvrIP – Active IP address of the secondary call processor.
VLAN Config – Enabled or disabled VLAN for this telephone,
acquired from either DHCP option 184 or a setting in the
telephone’s memory.
Mem- My IP Addr – The IP address configured in the
telephone’s memory though the LUI utility.
Mem- Subnet Mask – The IP mask configured in the
telephone’s memory though the LUI utility.
Mem- Gatwy IP – The default gateway IP address configured in
the telephone’s memory though the LUI utility.
