The Global Directory 49
To configure global directory redundancy at a branch office (R1B1 in this
example):
1 Log on to the VCX branch server (R1B1) using the cworks account and
enter these commands:
cd /opt/3com/VCX/vcxdata/globaldir/bin
./config.sh
2 At the prompt, enter 101.
The Enter the Primary ROSCA IP Address or Hostname prompt appears.
3 Enter the hostname or IP address of the primary server at the local
regional office (in this example, R1).
The Enter the Secondary ROSCA IP Address or Hostname prompt
appears.
4 Enter the hostname or IP address of the primary server at the remote
regional office (in this example, R2).
The Enter an Username for both Primary & Secondary ROCSA’s prompt
appears.
5 Enter the username for the cworks account. The default is cworks but
may be changed during installation.
The Enter Password prompt appears.
6 Enter the password for the cworks account after the asterisks (*). The
default is cworks but may be changed during installation.
7 Press Enter.
The Re-type Password prompt appears.
8 Reenter the password for the cworks account after the asterisks (*).
The Enter the Global Directory Input Path at ROCSA
[/opt/3com/VCX/vcxdata/db/export] prompt appears, which lists the
default path to the location of the regional user directory common file.
9 Press Enter.
3Com does not recommend changing this default directory path.
10 Press Enter to return to the main menu.
11 At the prompt, enter
0 to exit the script.
