138 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
3 In the Emergency Number column, click the number you want to edit.
The Edit Emergency Number page appears.
4 In the Emergency Number field, edit the emergency number.
5 Click Save.
The Emergency Numbers page refreshes showing the new emergency
number.
Deleting Emergency
Numbers from an ERL
To delete an Emergency Number from an ERL.
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 From the Location Settings column, click Emergency Numbers for the ERL
you want to configure.
The Emergency Numbers page appears.
3 Enter a check mark in the check box preceding the emergency number
you want to delete.
4 Click Delete Selected.
A pop-up window appears prompting you to confirm the emergency
number delete action.
5 Click OK.
The Emergency Numbers page refreshes verifying that the emergency
number was deleted.
Editing Emergency
Gateway IP
Addresses from an
ERL
To edit an Emergency Gateway IP Address for the ERL.
CAUTION: If Emergency service settings or emergency lines are changed,
(for example, the gateway IP address or emergency digits) they will not
take effect until the telephones are power cycled. A simple logout/login
of the telephone is not adequate.
1 In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2 From the Location Settings column, click Emergency Gateway IP for the
ERL you want to configure.
