Managing Requestors 317
Figure 124 Add Requestor Page
5 Enter the following field information:
■ Name — Enter a unique name to identify the requestor.
■ IP Address — Enter the IP address of the Tier 1 or Tier 2 component in
dotted decimal format.
■ IP Port — Specifies the port number used to communicate with the
Tier 1 or Tier 2 component. The default is 5060.
6 Click Save.
The Requestors page appears listing the added requestor.
Editing Requestors To edit a requestor:
1 Click Requestors.
The Requestors page appears. See Figure 123
.
2 In the Name column, click the name of the requestor you want to modify.
The Edit Requestor page appears.
3 Modify the fields as required. See the field descriptions in Adding
Requestors.
4 Click Save.
The Requestors page appears.
Deleting Requestors To delete requestors:
1 Click Requestors.
The Requestors page appears. See Figure 123
.
