275
∗1 Rated power consumption.The power supply specifications of the FR series manual controllers and speed controllers are 200VAC 50Hz, 220/220VAC 60Hz,
and 115VAC 60Hz.
Commercially available products (as of Jan. 2010)
Blade terminal
Phoenix Contact Co.,Ltd.
NICHIFU Co.,Ltd.
Contact the manufacturer regarding the delivery schedule, price, specifications, and other information of the products listed here.
∗1 A blade terminal with a insulation sleeve compatible with MTW wire which has a thick wire insulation.
∗2 Applicable for the terminal ABC.
FR Series Manual Controller/Speed controller
Manual controller FR-AX
For independent operation. With frequency meter, frequency
potentiometer and start switch.
Applicable for all
models
DC tach. follower FR-AL
For synchronous operation (1VA) by external signal (0 to 5V, 0
to 10V DC) ∗1
Three speed selector FR-AT
For three speed switching, among high, middle and low speed
operation (1.5VA) ∗1
Motorized speed setter FR-FK
For remote operation. Allows operation to be controlled from
several places (5VA)∗1
Ratio setter FR-FH
For ratio operation. The ratios of five drive units can be set
(3VA) ∗1
Speed detector FR-FP For tracking operation by a pilot generator (PG) signal (3VA) ∗1
Master controller FR-FG
Master controller (5VA) for parallel operation of multiple
(maximum 35) d
rive unit
s.∗1
Soft starter FR-FC
For soft start and stop. Enables acceleration/deceleration in
parallel operation (3VA) ∗1
Deviation detector FR-FD
For continuous speed control operation. Used in combination
with a deviation sensor or synchro (5VA) ∗1
Preamplifier FR-FA Used as an A/V converter or arithmetic amplifier (3VA) ∗1
Others
Pilot generator QVAH-10 For tracking operation. 70V/35VAC 500Hz (at 2500r/min)
Deviation sensor YVGC-500W-NS
For continuous speed control operation (mechanical deviation
detection). Output 90VAC/90
°
Frequency setting
potentiometer
WA2W 1kΩ
For frequency setting. Wire-wound 2W 1kΩ type B
characteristic
Frequency meter (64mm ×
60mm)
YM206NRI 1mA
Dedicated frequency meter (graduated to 120Hz). Moving-coil
type DC ammeter
Calibration resistor RV24YN 10kΩ
For frequency meter calibration. Carbon film type B characteristic
Name Model Manufacturer Structure, Specifications, etc.
Communication connector
5-554720-3
Tyco Electronics
Corporation
RJ-45 connector
Communication cable
SGLPEV-T
(Cat5e/300m)
24AWG × 4
Mitsubishi Cable
Industries, Ltd.
Cat.5e cable that is compatible with TIA/EIA standards.
(10BASE-T/100BASE-T/1000BASE-T)
Flathead screwdriver
SZF 0-0,4 × 25
Phoenix Contact Co.,
Ltd.
A flathead screwdriver suitable to push the open/close button
when wiring to the control circuit.
Cable Size
(mm
2
)
Blade Terminal Model
Crimping Tool
Name
with insulation sleeve
without
insulation sleeve
for UL wire∗1
0 . 3 A I 0, 5 - 1 0 W H ------ ------
CRIMPFOX 6
0 . 5 A I 0, 5 - 1 0 W H ------ A I 0 ,5 - 10 WH - G B
0.75 AI 0,75-10GY A 0,75-10 AI 0,75-10GY-GB
1 AI 1-10RD A 1-10 AI 1-10RD/1000GB
1.25, 1.5 AI 1,5-10BK A 1,5-10 AI 1,5-10BK/1000GB ∗2
0.75 (for two
cables)
AI-TWIN 2 × 0 , 7 5 - 1 0 G Y ------ ------
Cable Size (mm
2
)
Blade Terminal Product
Number
Insulation
Product Number
Crimping Tool
Product Number
0.3 to 0.75 BT 0.75-11 VC 0.75 NH 67
Name Model Applications, Specifications, etc.
Applicable
drive unit
