Cisco Systems 815 Saw User Manual


 
Chapter 1 Overview
Key Features
1-2
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Figure 1-1 Cisco 815 Integrated Services Router
Table 1-1 Key Features
Feature Description
One Fast Ethernet
(10/100BASE-TX) port
Operates in full- or half-duplex mode (with manual
override available).
Supports autosensing for 10- or 100-Mbps operation.
Supports IEEE 802.1Q VLAN encapsulation.
Two Cisco WAN interface card
(WIC) slots
Supports a WIC-4ESW and HWIC-CABLE-D-2.
Note These slots are fixed and are not field replaceable.
1
Console port Supports router configuration and management with a
directly-connected terminal or PC. Supports up to 115.2 kbps.
Auxiliary port Supports modem connection to the router, which can be
configured and managed from a remote location. Supports up to
115.2 kbps.
SNMP support Router can be managed over a network using Simple Network
Management Protocol (SNMP).
PWR
ACT
ACT/CH0
ACT/CH1
OK
ACT/CH0
W
IC0
W
IC1
E
TH
ACT/CH1
COL
146794
Cisco
800
series
router