Filter
Top Products
Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Installing and Removing a DIMM
C-6
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Step 2 Place the DIMM in an antistatic bag to protect it from ESD damage.
Installing a DIMM
Caution Do not insert DIMMs into the same connector more than 25 times. Overuse can
damage the connector.
To install a DIMM, follow these steps:
Step 1 Make sure that both latches on the DIMM connector are open.
Step 2 Orient the DIMM so that the polarization notch lines up with the key in the
connector. See Figure C-5.
Step 3 Carefully insert the DIMM into the connector.
Step 4 Carefully and firmly press the DIMM into the connector until both latches rotate
to the closed position against the DIMM.
Figure C-5 Installing a DIMM
1 Insert the DIMM 2 Latches rotate to closed position
155844
2
2
1