Filter
Top Products
C-9
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Installing a VPN Module
Step 4 To secure the VPN board connection in the socket, you must attach a retention
clip.
a. The retention clip for the Cisco 815 integrated services router slides over the
VPN module where it connects to the socket and clips to the side of the router
motherboard. The horizontal tab slides underneath the WIC 0 socket, as
shown in Figure C-9.
Figure C-9 Retention Clip Location
b.
Align the post in the middle of the clip with the hole in the center of the socket
side of the VPN card as shown in Figure C-10.
29970
Slide this peg beneath
the connector's edge