Filter
Top Products
Chapter 2 Installation
Optional Installation Procedures
2-10
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Step 2 Connect the DB-9 end of the cable to the DB-9 end of the DB-9-to-DB-25 adapter.
Step 3 Connect the DB-25 end of the adapter to the modem.
Stacking the Router
You can stack one Cisco 815 integrated services router in a four-device stack,
along with other Cisco products designed for stacking with the router. Using a
stacking clip and fastener, you can stack each device directly on top of another
device.
Note The Cisco 815 integrated services router is not shipped with the stacking
equipment described in this section; however, the equipment is included with all
other Cisco products that are designed to be stacked.
Other Cisco products designed to be stacked with the router comes with a stacking
clip and a fastener for keeping the multiple devices together in a stack. Before you
stack the devices, assemble the clip and fastener as shown in Figure 2-5.