Filter
Top Products
C-13
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Closing the Chassis
Closing the Chassis
After installing memory or a VPN module on the motherboard, attach the router
cover by following these steps:
Step 1 If you disconnected the fan from the motherboard in the “Opening the Chassis”
procedure, reconnect the fan cable to the connector labeled FAN on the
motherboard.
Step 2 Locate the posts that protrude from the inside of the chassis cover, and locate the
corresponding openings on the chassis bottom.
Step 3 Line up the posts with the corresponding openings, as shown in Figure C-8, and
carefully slide the posts into the openings, taking care not to damage the router
motherboard with the posts.