Filter
Top Products
1-5
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Chapter 1 Overview
Back Panel Ports and LEDs
Figure 1-4 WIC-4ESW
Figure 1-5 HWIC-CABLE-D-2
95777
1x
ACT
LNK
2x
ACT
LNK
3x
ACT
LNK
4xACT
LNK
WIC
4ESW
Table 1-2 Back Panel Connectors
Connector/Slot Label/Color Description
Ethernet port 10/100
ETHERNET
(yellow)
Connects the router to the local Ethernet network. This
port autosenses the speed (10 Mbps or 100 Mbps) and
duplex mode (full- or half-) of the device to which it is
connected, and then operates at the same speed and in the
same duplex mode.
Auxiliary port AUX
(black)
Connects to a modem for remote configuration using
Cisco IOS software.
Console port CONSOLE
(blue)
Connects to a terminal or PC for local configuration
using Cisco IOS software.
WIC-4ESW (WIC 0) No label Supports interface card with four 10/100-BASE-TX
Ethernet switchports. See Figure 1-4.
HWIC-CABLE-D-2
(WIC 1)
No label Supports one Cisco cable WIC. See Figure 1-5.
146788
LINK
US
ONLINE
HWIC-CABLE-D-2
POWER
DS
CABLE