Filter
Top Products
B-1
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
APPENDIX
B
Cabling Specifications
This appendix describes cables and cabling guidelines for the Cisco 815
integrated services router and contains the following sections:
• Ethernet Cables
• Ethernet Network Cabling Guidelines
• Console Cable and Adapter
Note For information about cables used with Cisco WAN interface cards (WICs), refer
to the Cisco Interface Cards Hardware Installation Guide.
Ethernet Cables
This section describes the Ethernet cables that are used to connect the router to
your local Ethernet network. A 10/100BASE-TX router, such as the Cisco 815
integrated services router, requires Category 5 unshielded twisted-pair (UTP) or
shielded twisted-pair (STP) cable. Table B-1 gives the pinouts for an Ethernet
cable.