Filter
Top Products
2-11
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Chapter 2 Installation
Optional Installation Procedures
Figure 2-5 Assembling Stacking Clip and Fastener
After assembling the clip and fastener, follow these steps to stack the router with
another device:
Step 1 Place the clip on top of the lower device, as shown in Figure 2-6. Slide the clip
forward so that the front tabs slide into the vent slots. Make sure that the back
hooks fit over the edge of the lower device.
H11542
Push plastic fastener
through small hole
at the end of the
stacking clip.