Filter
Top Products
CHAPTER
3-1
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
3
Installing the Cisco ASR 901 10G Router
This chapter describes how to install the Cisco ASR 901 10G router, and how to connect it to external
devices. These are the following sections:
• Network Modules, page 3-1
• Mounting the Cisco ASR 901 10G Router, page 3-2
• Connecting the Chassis Ground and Power, page 3-10
• Installing and Removing SFP Modules, page 3-17
• Connecting Cables, page 3-20
• Powering on the Router, page 3-24
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Network Modules
You can order the Cisco ASR 901 10G router with the following interface modules.
• T1/E1 interface module
• SFP Ethernet interface module
• RJ-45 Ethernet interface module
Note Interface modules are installed and shipped with the router; they are not field replaceable.