Filter
Top Products
3-15
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Chapter 3 Installing the Cisco ASR 901 10G Router
Mounting the Cisco ASR 901 10G Router
Installing the AC Power Cord Retainer
Complete the following steps to install the AC power cord retainer to the Cisco ASR 901 10G router
using the corresponding mounting point.
Step 1 Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve
can be snapped off and used for thin cords. See Figure 3-16.
Step 2 Slide the retainer around the AC power cord, and pass it around the lanced loop on the router. See
Figure 3-13.
Figure 3-13 Inserting the Retainer through the Lanced Loop
Step 3
Slide the retainer through the first latch. See Figure 3-14.
Figure 3-14 Sliding the Retainer Through the Latch
1 AC power cord 2 Power cord retainer
3 Sleeve for thinner power cords 4 Loop
334520
14 3 2
334522
123