Filter
Top Products
3-14
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Chapter 3 Installing the Cisco ASR 901 10G Router
Mounting the Cisco ASR 901 10G Router
Step 1 In the accessory kit, locate the two cable holders and the two pan-head Phillips head screws used to
attach the cable holders to the router. (part number of cable holder is 52-0685-01.)
Step 2 Set the parts aside.
Step 3 Insert the DC power cord through the cable holder. See Figure 3-11. Repeat this step for the second DC
power cord.
Figure 3-11 Inserting the DC Power Cord Through Cable Holder
Step 4
Use a Phillips head screwdriver to attach the cable holders to the front of the router with the two screws
from the accessory kit. See Figure 3-12.
Figure 3-12 Attaching Cable Holder to the Router
334572
1
2
1 DC power cord 2 Cable holder
334521
1 3 1 232
1 Cable holder 2 DC power cord
3 DC terminal 4 —