Filter
Top Products
3-8
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Chapter 3 Installing the Cisco ASR 901 10G Router
Mounting the Cisco ASR 901 10G Router
Attaching Brackets for Wall-Mounting
Perform the steps given below to attach brackets on the router for wall-mounting.
Step 1 Locate the mounting holes of the router.
Step 2 Align the wall-mounting bracket with the router and position with the four Number 6-32 x 0.25-inch
screws (provided). See Figure 3-5.
Step 3 Insert the screws (in four places) and tighten using a Number 2 Phillips screwdriver (on each side).
Step 4 Position the router in the equipment rack lining up the bracket holes on the router with the holes on the
rack and secure with four Number 6-32 x 0.25-inch mounting screws (two on each side).
Step 5 Tighten the screws using a 1/4-inch flat-blade screwdriver (on each side).
Figure 3-5 Attaching 19-inch Bracket to Wall-Mount the Router
Mounting the Router on a Wall
The router can be wall mounted with the ports either facing up or down. The illustration used in the
procedure below uses the orientation of ports facing upwards.
1 Phillips truss-head screws 2 —