Craftsman 113.225931 Sander User Manual


 
2. Toturnmachineon.insertfingerunder switch lever
and pull end of switch out,
3. TO turn machine OFF , . . PUSH lever in.
Never leave the machine unattended until it has come
to a complete stop,
4. To lock switch in OFF position . . . hold switch IN
with one hand . . . REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, AL-
WAYS LOCK THE SWITCH "OFF" WHEN
MACHINE IS NOT IN USE . .. REMOVE KEY
AND KEEP IT IN A SAFE PLACE . . . ALSO
. . IN THE EVENT OF A POWER FAILURE
(ALL OF YOUR LIGHTS GO OUT) TURN
SWITCH OFF.•. LOCK ITAND REMOVE THE
KEY. THIS WILL PREVENT THE MACHINE
FROM STARTING UP AGAIN WHEN THE
POWER COMES BACK ON.
5. Find plastic cable hanger from among the loose parts.
6. Route the motor cord behind the motor mount,
across the top of the base and plug it into the
receptacle in the side of the switch box,
7. Bring the power cord alongside the motor cord . . .
wrap the plastic cable hanger around the cords and
attach the hanger to the top of the base by pushing
i_ into a _" diameter hole.
CABLE
HANGER
POWER
CORD
MOTOR
CORD
13