Filter
Top Products
KNOW YOUR COMPOUND MITER
SAW
See Figure 3.
Beforeattemptingto use your saw, familiarizeyourself
withall operatingfeatures and safety requirements.
WARNING: Do not allowfamiliaritywith your
saw to make you careless. Remember that a
careless fractionof a secondis sufficientto inflict
severe injury.
15 AMP MOTOR
Yoursaw has a powerful15 amp motorwithsufficient
powerto handle toughcuttingjobs. It is made withall
ball beadngs,and has extemally accessiblebrushes
for ease of servicing.
10 in. BLADE
A 10 in.saw blade is includedwithyourcompound
mitersaw. Itwill cut matedais up to2-5/8 in. thick or
5-3/4 in.wide, dependingupon the thickness of the
materialand the settingat which the cut isbeing
made.
SWITCH
L_K_LEVER
UPPER
BLADEGUAND
CUTTING CAPACITIES
When the miter angle (miter table) Is set at O° and
the bevel angle Is set at 0°:
Your saw will cut materials up to a maximum of
5-3/4 in. wide X 2-5/8 in. thick.
When the miter angle (miter table) Is set at 45° and
the bevel angle Is set at 0°:
Yoursaw will cut matsdalsup toa maximumof
4-1/4 in.wide X 2-5/8 in. thick.
When the miter angle (miter table) Is set at O° and
the bevel angle is set at 45°:
Your saw willcut materialsupto a maximumof
5-3/4 in.wide X 1-7/8 in.thick.
When the miter angle (miter table) Is set at 45° and
the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
4-1/4 in.wide X 1-7/8 in.thick.
SWITCHTRIGGER
DUSTGUIDE
BEVEL
LOCKKNOB
BLADEGUARD
MITERTABLE
)HANDS
ZONELABEL
"NOHANDSZONE"
ZEROCLEARANCE
'LATE
LOCKPLATE
CONTROLARM
Posmvz_oP(_
MITER .
LOCKHANDLE
Fig. 3
10