Filter
Top Products
BladeDiameter 10in.
BladeArbor 5/8in.
NoLoadSpeed 5000RPM
Rating 120Volts,60Hz-ACOnly
Input 15Amperes
NetWeight 32Ibs.
CuttingCapacitywithMiterat0°/Bevel0°:
5-3/4in.Wx 2-5/8in.T
MaximumCuttingCapacitywithMiterat45°/Bevel0°:
4-1/4in.Wx2-5/8in.T
MaximumCuttingCapacitywithMiterat0°/Bevel45°:
5-3/4in.Wx1-7/8in.T
MaximumCuttingCapacitywithMiterat45°/Bevel45°:
4-1/4in.Wx 1-7/8in.T
YourCompoundMiterSawhasbeenshipped
completelyassembled exceptforthe blade, miterlock
handle,and dust guide.
_lb WARNING: If any parts are missing,do not
operate thistooluntilthe missingparts are
replaced. Failureto do socould resultin possible
serious porsonal injury.
• Remove all loose partsfrom the carton. Separate
and checkwith thelistof looseparts.See Rgure 2.
• Remove the packingmaterialsfrom aroundyour
saw.
• Carefullyliftsaw from the carton and place it on a
level work surface.Althoughsmall,this sew is
heavy.To avoid back injury,get helpwhen
needed.
Do not discardthe packingmaterialsuntilyou
havecarefully inspectedthe saw, identifiedall
looseparts, and setisfa_odly operated your new
saw.
• Your saw has been shippedwiththe saw arm
lockedinthe down position. To release sew arm,
pushdown on top ofsaw arm and pullout the lock
pin. See Figure 4.
• Liftthe saw arm bythe handle.Hand pressure
shouldremain on the sew armto preventsudden
rise upon release ofthe lock pin.
• Examine all partsto make sure no breakage or
damage has occurreddudngshipping.
If any parts are damaged or missing,do notattemptto
plugin the power cord andturn the switchon untilthe
damaged or missingparts areobtained and are
installedcorrectly.