Filter
Top Products
4 308–293
Selection
Charts
TERMS:
Light Fluid:
Up to 18 seconds with No. 2 Zahn cup (20 centipoise)
Medium Fluid:
19 to 28 seconds with No. 2 Zahn cup (20–64 centipoise)
Heavy Fluid:
Greater than 28 seconds with No. 2 Zahn cup (greater than 64 centipoise) --
2.8 V
olatile Organic Compounds, High-solid Polyurethanes, Heavy W
aterborne Enamels
P/N:
Part number
NOTE:
See page 6 for additional tips on selecting the needle/nozzle/air cap set best suited to your application.
CHART 1: GUN ASSEMBLIES, Series B
Standard
Gun Assemblies
With
standard needle/nozzle/air cap kit
Includes:
Standard
Complete
Gun Assy
.
Part No.
Standard
Needle/
Nozzle/Air
Cap Kit P/N
Orifice Size
Material Usage
(See TERMS above)
236–013 238–233 0.042”
(1.067 mm)
Light
to Medium Fluids
or Low Fluid Flow
[5–8
oz./min. (0.15–0.24 l/min.)]
236–014 238–234
0.055” (1.397 mm)
Light to Medium Fluids or Medium Fluid
Flow
[6–12 oz./min. (0.18–0.36 l/min.)]
236–015 238–235
0.070” (1.778 mm)
Medium to Heavy Fluids or Medium Fluid
Flow
[6–12 oz./min. (0.18–0.36 l/min.)]
236–016 238–236
0.086” (2.184 mm)
Heavy Fluids or High Fluid Flow
[10–15 oz./min. (0.3–0.45 l/min.)]
Optional
Gun Assemblies – available as “Build to Order”
With
optional needle/nozzle/air cap kit
Includes:
Optional
Complete
Gun
Assy
.
Part No.
Optional
Needle/
Nozzle/Air
Cap Kit P/N
Orifice Size
Material Usage
(See TERMS above)
236–020 238–230 0.020”
(0.508 mm)
Light Fluids or Low Fluid Flow
[3–6 oz./min. (0.09–0.18 l/min.)]
236–021 238–231
0.026” (0.660 mm)
Light Fluids or Low Fluid Flow
[3–6 oz./min. (0.09–0.18 l/min.)]
236–022 238–232
0.030” (0.762 mm)
Light to Medium Fluids
or Low Fluid Flow
[5–8
oz./min. (0.15–0.24 l/min.)]