Filter
Top Products
-12-
G0644 15" Open-End Wide Belt Sander
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo
-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully
. Occasionally
we pre-install certain components for shipping
purposes.
Box 1: (Figure
4) Qty
A. Sanding Assembly ...................................... 1
B. Sanding Belt 16" x 48" (not shown) ........... 1
C. Conveyor Front Roller Guard (not shown) . 1
Box 2: (Figure
5) Qty
D. Cabinet Stand ............................................. 1
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi
-
als to eliminate choking/suf
-
focation hazards for children
and animals.
D
Figure 5. Model G0644 box 2 inventory.
Figure 4. Model G0644 box 1 inventory.
A