Filter
Top Products
1-4
E
n
g
lis
h
StarBoard Link EZ2
Introduction
1.3 Role of Each Part
1.3.1 StarBoard
(1) Digitizer
Receives information regarding characters or
images drawn with the pen or the user's finger,
and transmits this data to the PC.
(2) Status LED
The connection status is displayed by the color
and lighting status of the LED.
Lit green: Normal
Flashing orange: Recognizing StarBoard
Lit orange: Error has occurred
(3) Projection area/Input area
Characters or images drawn in this area are
imported into the PC. When using the
StarBoard Link EZ2, make sure that the image
projected from the projector is kept within this
area.
(4) Reflective Bars
Reflects light. Used to capture pen or finger
operations.
(5) USB Cable
Used to connect the StarBoard with the PC.
(6) Cable Holder
Used to fix the USB cable in place.
(7) Corner piece
To be used to connect the reflective bars together.
StarBoard Link EZ2
Installation Image
(1)
(2)
(3)
(5)
(4)
(6)
(7) (7)
(4)
(4)