Filter
Top Products
3-11
StarBoard Link EZ2
How to use
Englis
h
(7) Start "Go" → "Applications" → "Lsadrv" → "LsCamWiz," and then adjust the sensor in
accordance with the procedure on page 2-10.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar → "Settings" → "StarBoard" → "Calibrate," and then perform
position alignment.
Important
Run the “StarBoard Link EZ Setup Wizard” when operated for the
first time, and whenever the board is moved.
Not doing so may cause operation errors.