Hitachi SBLE2-ML120201 Battery Charger User Manual


 
4-7
Englis
h
StarBoard Link EZ2
Appendix
4.4 Proper Care and Cleaning
Clean the StarBoard periodically so that you may use it for a long time to come.
(1) Digitizer Cleaning
When cleaning the digitizer, use a soft cloth dampened with a diluted neutral cleansing agent
that does not contain a polishing compound.
Never use a solvent such as thinner.
Note that rubbing or striking the StarBoard surface with a finger nail or other hard object
may result in scratching.
(2) Cleaning the silver surfaces of the reflective bars
Use a soft brush to clean the silver surfaces of the reflective bars.
Do not use water or liquids.
Note that rubbing or striking the silver surfaces of the reflective bars with nails or hard
objects may result in scratching. The product may not work correctly if scratched.
(3) Cleaning the Magnets
Use a soft cloth dampened with water or alcohol to remove dirt from the magnet sections of
the digitizer/reflective bars.
Do not use cleaners etc. that contain surfactant, as doing so will reduce the retaining force of
the magnets.
(4) Cleaning the electronic pen
To clean the electronic pen, use a diluted neutral cleansing agent that does not contain a
polishing compound. Do not apply the neutral cleansing agent directly, but rather dampen a
soft wet cloth with a mixture of water and the cleaner, and wipe. Never use a solvent such as
thinner.
Do not allow the pen tip to get wet.
4.5 Replaceable Parts
(1) Stylus pen
(2) AAA alkaline battery
(3) Spare pen tip
For details on obtaining them, contact your dealer or a support center.