Filter
Top Products
4-4
Englis
h
StarBoard Link EZ2
Appendix
4.2 Regularly Auto Sensor Adjustment (For Windows)
While using StarBoard, auto sensor adjustment will execute regularly. To use StarBoard
comfortably this function is recommended to use.
You cannot use this Adjustment for Mac.
4.2.1 Sensor Auto Adjustment Procedure
[1] Confirmation message of auto sensor adjustment will be displayed after 7days as default
passed from first connect of StarBoard to PC. If you press “Yes”, auto sensor adjustment
program will execute. If you press “No”, this will not execute.
Manual execute
For the manual execute, select “MENU” – “Settings” – “StarBoard” – “StarBoard Settings”
and press [1]“Sensor adjustment” in the StarBoard toolbar.
Change of auto execute interval of the sensor adjustment
For the auto execute interval of the sensor adjustment select from 0 to 30
by [2] button. If you select “0”, auto execute is disable.
NOTICE
Using infrared and compact cameras, this product captures the image (shadow) of a
pen or finger and detects the corresponding coordinate position. Do not operate
near lighting that will obstruct the capture of the image.
・ Locations where the surface or side of the projection area are exposed to
direct sunlight.
・ Locations in which there are light fittings with many light bulbs or infrared
rays directly above the projection area.
[1]
[2]
Manual execute /Chan
g
e of auto execute interval of the sensor ad
j
ustment