Filter
Top Products
3-6
StarBoard Link EZ2
How to use
Englis
h
3.3 How to User the Electronic Pen
This section gives a basic description of how to use the electronic pen (option).
3.3.1 Inserting the Battery
Perform the preparations for using the electronic pen.
[1] Insert the battery into the electronic pen.
(1) Rotate the battery cover ¼
counter-clockwise, and pull it to
remove it.
(2) As shown in the figure, insert the
AAA alkaline battery so that the +
side faces the outside.
(3) Press the battery cover on, and
rotate it clockwise ¼ turn to fix it
in place. (Be careful not to over
tighten the cover, as doing so may
damage it.)
CAUTION
Be sure to install batteries correctly.
Do not install batteries with positive and negative terminals reversed, or use batteries
other than the type specified. It will cause pen malfunctions and excess heat, or burns to
the hand.
Be sure to provide insulation during disposal.
Be sure to insulate the positive and negative terminals of the battery using cellophane
tape, or similar material when disposing of batteries. Disposing of batteries without
insulating them may lead to overheating, bursting, or ignition due to shorting, resulting
in personal injury or fire. Furthermore, be sure to follow all local rules and regulations
regarding proper battery disposal. If within the EU, be sure to follow Batteries
Directive.[Batteries directive (2006/66/EC)]