Filter
Top Products
VALVE SECTION
M104
32
I DO NOT USE WASHERS
WHEN ASSEMBLING 40524 AND 45459 GASKETS AND 49164 PLATE BE-
ON 2 CENTER SCREWS.
TWEEN 42433-1 AND 42164-1 ASSEMBLIES, TORQUE THE SIX Y154-57
SCREWS DOWN EVENLY TO ABOUT 50 IN. LBS. FURTHER TIGHTEN EACH
I
3
SCREW TO 70 5 IN. LBS USING THE PATTERN SHOWN.
42433-1 MANIFOLD AND VALVE ASSEMBLY
Y227-2-L PIPE PLUG (6)
0 Y154-57 CAP SCREW (6)
40522 VALVE STEM
Y325-7 “0” RING
0 Y14-10 WASHER (4)
31125 SPRING
I
31125 SPRING (3)
40524 GASKET 0
0 NOT INCLUDED IN 42433-1 ASSEMBLY.
41440-1 CONTROL VALVE ASSEMBLY INCLUDES: 42433-1 AND 42164-1 ASSEMBLIES.
Y6-243-C SCREW (6)
* USE 46496 SPACER ONLY WHEN 41215 VALVE BUSHING
IS FLUSH OR BELOW FLUSH WITH 40511-1 HOUSING.
41250 BUSHING &, “0” RING ASSEMBLY
Y325-17 “0” RING (4)
41266 SCREEN
11215 VALVE BUSHING
40264 “0” RING (4)
41213 VALVE PISTON (4)
25-15 “0” RING (4)
q
1216 VALVE STEM
Y325-17 “0” RING (3)
q
41214-1 VALVE BUSHING
Y154-54 CAP SCREW (4)
40525-1 VALVE PLATE (2)
Y14-10 WASHER (4)
Y132-107-C SCREW (8)
A Y60-45 DRIVE SCREW (2)
41211-1 NAMEPLATE
A 45456 ADHESIVE SCALE
41572 SPACER (2
40523-1 TRIP TAB (2)
ASSEMBLE BUSHING 41215
WITH SLOTS FACING EX-
42164-1 HOUSING AND VALVE ASSEMBLY
HAUST HOLES IN HOUS-
ING.
NOT INCLUDED IN 42164-1 ASSEMBLY.
TORQUE TO 45 - 55 IN. LBS.
AUXILIARY VIEW SHOWING CORRECT
ORIENTED POSITION OF SLOTS IN
BUSHING WITH EXHAUST HOLES IN
PARTS MARKED THUS ARE INCLUDED IN SERVICE KIT NUMBER 45762, SEE PAGE 22.
HOUSING.
1