Filter
Top Products
133
133
C H A P T E R 8 Console Port Use and Troubleshooting
Transferring files to and
from the switch using
TFTP
To transfer files using TFTP:
1 At the command prompt, start a TFTP session with the switch.
2 To obtain a directory listing of all the files on the switch, type:
get dir.
3 Examine the directory listing to confirm the names of the files
present in the switch.
Report, log and filter files and a parameter file with a .p or .nvp
extension appear in the directory listing.
4 To retrieve the file that you want, type: get <filename>.
Note If you “get” a report, then the report file is generated
on-the-fly and transferred.
5 If the TFTP access is password protected, type:
get<password>/<filename>. (For example, get edin-
burgh/report
.)
500.book Page 133 Thursday, September 2, 1999 1:44 PM