Filter
Top Products
75
75
C H A P T E R 4 Advanced Configuration
Adding a Member
To add a member to a user group:
1 Select IP Filtering Setup>Add member.
2 In Type, select whether the member is defined by Port (Proto-
col) or by Address.
3 For port selections, define the IP filter protocol, while for
Address define the IP Address (and subnet if necessary).
4 Select the User Group for this new member.
5 Click OK.
Checking Member
connections
This checks which members a specific member can communicate
with, and lists them on screen. To check connections:
1 Select IP Filtering Setup.
500.book Page 75 Thursday, September 2, 1999 1:44 PM