Filter
Top Products
62
C H A P T E R 3 Standard Configuration
62
4 Select the Port status box.
5 In Path cost, type the required value.
6 Click OK.
Changing priority of the
port in the spanning tree
The higher the value, the lower the chance of this port being used as
the designated or root port. To change the priority value:
1 Click the port you want to change.
2 Select Port Setup.
3 Click Spanning Tree.
4 Select the Port status box.
5 In Priority, type the required value.
If there are two ports with the same value, the port with the
lowest port number is chosen.
6 Click OK.
500.book Page 62 Thursday, September 2, 1999 1:44 PM