Filter
Top Products
69
69
C H A P T E R 4 Advanced Configuration
3 Double-click Server Expiry Time-out, and type the new
value.
4 Click OK.
Ports with IP learning IP learning must be enabled when using IP policies. (IP learning is
enabled on all ports by default.) If you want to change the settings for
individual ports, for example if you are using protocols other that IP
protocols and don’t want these stations to be learned using IP rules,
you should:
1 Select VLAN/Routing Setup.
2 Click Advanced.
3 Click IP Traffic to specify which ports support IP learning.
4 Click OK.
Routing Between VLANs
Introduction After you have created the VLAN groups, you can move (or route)
packets of data between VLANs using the IP and IPX protocols.
500.book Page 69 Thursday, September 2, 1999 1:44 PM