Intel 550F Saw User Manual


 
18
C H A P T E R 2 Intel Device View
18
System Requirements
Requirements for Intel
Device View under
Windows
You need a PC with the following minimum requirements to run Intel
Device View:
Microsoft Windows NT workstation or server, version 4.0, or
Microsoft Windows 95 or Microsoft Windows 98.
(Windows NT 4.0 English language version workstation recom-
mended.)
A network adapter installed.
30 MB of free hard disk space.
A color display with 800 x 600 resolution and 256 colors.
The Microsoft IP protocol must be installed and configured
before installation of Intel Device View.
DHCP limitation Three important things to know:
Do not use a PC running Windows NT server (with its DHCP
server installed) to run Intel Device View.
Ensure the IP address for the PC is not changed by the DHCP
server.
PCs that use a network management system that uses BootP,
DHCP or SNMP Trap Receiving, may have their network man-
agement system disabled by Intel Device View.
Management PC
restrictions
To manage the switch from a PC connected directly to the switch, the
PC must not use frame tagging. To manage the switch from a PC with
IEEE 802.1Q tagged frames, management must be through a device
which untags the frames.
Requirements for Intel
Device View on the Web
server
You need a PC with the following minimum requirements to run Intel
Device View:
One of the following running: Microsoft Windows NT 4.0 Server
with Internet Information Server (IIS) 2.0 or later; or Windows
NT Workstation with Peer Web Services.
30 MB of free hard disk space.
The Microsoft IP protocol must be installed and configured
before installation of Intel Device View.
500.book Page 18 Thursday, September 2, 1999 1:44 PM