Filter
Top Products
37
Special Functions
5-25.Stereo Viewer
The stereo viewer button would appear only when the patient data has the stereo image.
(How to get the stereo image, refer to “4-34.Stereo assist”)
Click stereo button, and the stereo viewer “3D Para” would appear.
1) Click one point on the almost the center of the optical nerve head.
2) Click [VIEW] button to change to the next image,
3) Click one point on the same position of the previous image.
4) Click [STEREO] button to show the stereo image.
When the positioning is not good, click [CLEAR POSITION] and try to set the point again.
When click [ZOOM STEREO] button, the image size gets big.
Push the arrow key such as ‘Å ‘ in the keyboard to change the position of the center.
Push the ‘PageUp’ or ‘PageDown’ key to magnify or reduce the image.
Click [BRIGHT] button to make the image brighter.
Recommended position of the click point
Optic nerve head picture
The crossing blood vessel around oblique line
(About positioning between each image:
In menu [View]>>[Setting]>>[Invalidate Auto Position], get rid of the check mark [Invalidate Auto Position], the
positioning process is half automatic to shift the best position between each image after pointing roughly.
Usually need to set the exact points between each image.)
1
2
3